CitriSurf 77 Plus
Technical Data:
Description:
CitriSurf 77 Plus is a high-quality blend of chemicals formulated for cleaning, rust removal and passivation of stainless steel products. It is provided in trigger sprayer bottles for applications where it is desired to spray the product on a local area. CitriSurf 77 Plus is specifically designed to provide a portable, low-cost cost and efficient removal of contaminants and all rust and free iron from the surface of stainless steel, providing the highest chrome oxide levels possible.
Physical Properties:
| Property | Specification |
|---|---|
| Specific Gravity | 1.04 |
| Approx. wt. /gallon | 8.7 lb/gal |
| Viscosity | 2 cps |
| Form | Liquid |
| Chemical Composition | Citric acid, water, proprietary ingredients |
| Operating Temperature | Room temp or higher |
| Flash Point | None |
| Water Solubility | Complete |
| Normal Working Concentration | Use as received |
| pH at Working Concentration | Approx. 1.6 |
Packaging:
22 oz. trigger sprayer bottles
Application Procedure:
CitriSurf is an excellent cleaner by itself for many cleaning and passivation processes. However, to assure the best results, the parts or areas to be passivated may be cleaned with an appropriate cleaning solution prior to treatment with CitriSurf solution, especially when heavy grease and oils are present. If thorough cleaning is not possible during use in the field, wipe the surface free of dirt and oils prior to application.
The parts or areas to be cleaned and passivated should be sprayed, immersed or wiped with CitriSurf 77 Plus to completely wet the surfaces, especially in crevices or in areas where any rust or corrosion may have occurred. The surface must be soaked or left moist with the CitriSurf 77 Plus solution for a period sufficient to remove all corrosion, free iron and contaminants from the surface. This is typically 15-30 minutes at room temperature, depending on the grade of stainless steel, hardness, and the condition of the surface. This should be determined by testing with your product. Coverage is approximately 90 square feet per 22 oz. bottle. If heavy rust needs to be removed, non-abrasive Scotch Brite™ or similar may be used halfway through the treatment. Difficult rust or corrosion must be tested to determine the exact best conditions for removal.
Rinse the surface thoroughly with clean water and dry completely in the air immediately. Drying can be accelerated by the use of a hot air blower (i.e. hair dryer), a clean cloth, or other drying medium to attain a highly passive surface. Repeat the process if needed to obtain the desired results.
Notes on Use:
Although CitriSurf 77 Plus will not harm most metal appliances or surfaces, and will enhance the brightness when used as directed, test a small area before full application. The use of this Product on sensitive grades of stainless steel and/or allowing it to dry on the surface may result in discoloration or etching of the metal. CitriSurf 77 Plus will not remove weld heat discoloration, for that the Weld Wizard product line is available.
Although very safe in normal use, CitriSurf 77 Plus is a citric acid-based material, and as such, it may cause irritation to exposed surfaces of the body. See the Safety Data Sheet before using this material. Rubber or plastic gloves should be worn to apply the product to the surface or to wipe it dry. Inhaling mist may be irritating to the nose and throat.
Do not apply CitriSurf to electrical wiring or other conductive material that is connected to electrical current without first turning off all electricity! CitriSurf is a water-based conductive material. Serious injury or death can occur from electrical shock.
Do not leave concrete or carbon steel exposed to CitriSurf for any period of time. Damage to these materials will occur with prolonged exposure.
For large-scale or ongoing immersion bath applications, a concentrate version of CitriSurf 2325 is available.
Disposal:
Dispose of according to all federal, state and local regulations.
Storage:
CitriSurf 77 Plus should be stored at temperatures between 50°F and 120°F in the bottles supplied with the product. (If accidentally frozen, thawing will return the product to normal.)
Technical Services:
For technical assistance, please contact Reba Scientific at +61 3 8526 8252.
Standards:
When used correctly, CitriSurf 77 Plus meets the requirements of the ASTM A967, ASTM A380, ASTM B600, and AMS 2700 standards.
Testing of your products with CitriSurf before using them in production is recommended. Every product and production facility is different and requires testing to ensure that CitriSurf is compatible with the particular situation. No warranty is implied, or may be given in writing or verbally, without the written permission of Reba Scientific.