Our Products

Acids, Caustics and Dangerous Solvents is still used as descaler to breaks down calcium, lime, scale, milk stone, beer stone and other deposits. This cause higher insurance premium, OHS cost, higher discharge fee and storage cost, reduce staff morale, etc.

A safer, more powerful alternative

BlowOut is a most aggressive line cleaner and descaler, yet non toxic and non corrosive. The potency of BlowOut combined, with its unique safety profile, makes it the natural choice of the U.S. Navy and U.S. Coast Guard. Further, Blow Out removes no trace metals from the system, making it legal to dispose effluent water directly into the sanitary system. Blowout is non-fuming, non-corrosive, non-toxic and biodegradable.

Blowout is the only non-acid solution that the Navy has cleared as their ships’ heat exchanger descaler! It is not just a non-toxic descaler, it is also a non-corrosive descaler with properties that keep your staffs and the environment safe.

Unlike others, SC-1000 plant-based degreaser is non-toxic, Solvents free, biodegradable, Non-Flammable, Non-carcinogenic and contains no terpenes, glycol ethers, petroleum distillates, caustic or acidic additives.

This all-purpose plant-based cleaner cleans the grease from vehicles, industrial spaces, kitchens and building exteriors and can be used on ANY surface that is compatible with water. It effectively removes fats, oils, proteins, sugars and other organic refuse, inhibiting the growth of bacteria and fungus, making it a great food degreaser as well as a biodegradable cleaner.

SC-1000 is an affordable option with various dilutions available for heavy-duty and all-purpose cleaning, as well as cleaning glass and acrylic. Its level of concentration makes it strong enough to substitute eight different all-purpose cleaners. It reduce life cycle cost, provide better asset protection, aid compliance to ISO 14000 and ISO 18000.

SynClean HD is a powerful water-based cleaner and solvent-free degreaser , patented ingredient and safely lifts grease from any surface without the use of solvents. Non-emulsifying, safe for any surface, SynClean is so safe it is endorsed by truck giants Volvo and Mack to safely clean big rigs. Also, it degrades hydrocarbons as well as animal and vegetable fats.

Synthetic acid in SynClean essentially replace those toxic and hazardous Muriatic (HCl), replace Sulphuric, Phosphoric Acid, Urea Sulphuric, Polymaleic Acid and nasty solvents like Methylene Chloride, perchloroethylene, d-Limonene, NMP, Acetone, MEK, MPK, Alcohols such as Ethanol and IPA, Toluene (thinners).

Instead of using solvents, it grabs hold of hydrocarbon molecules and lifts them out of the material being cleaned. Since it takes the entire hydrocarbon molecules, it doesn’t absorb water or become weighted down at the bottom of containment units.

In addition to its extraordinary degreasing powers, it contains detergents, penetrants, and rust and corrosion inhibitors, for a powerful all-in-one system. It is ideal as a non-corrosive truck wash or for use on trains, buses and as a safe mining equipment wash.

For years, the over-the-road truck industry has turned to acid washes to remove heavy build up and grime on its trucks. Of course, these products can streak the truck’s surface, etch the glass and dull the aluminium wheels and chrome.

Now, Torque! an acid-free truck wash & wax provide clean, anti-stick, protective carnauba wax in single application. Torque Super Duty Truck Wash & Wax combines the finest cleaners degreasers, brighteners and protectants, along with the right amount of our patented SynTech®, the world’s only synthetic acid, to offer the finest over road–truck wash available.

In fact, it’s the only truck wash guaranteed by Mack, Volvo, and Oshkosh trucks to not void your rust and corrosion warranty. This innovative 100% acid-free cleaner has a triple-zero HMIS score, is classified by OSHA as skin-safe and is non-D.O.T. regulated.

Other benefits of Torque include that it:

• Is acid-free
• Is non-corrosive
• Removes grease and dirt
• Eliminates rust
• Removes magnesium chloride
• Provides UV protection
• Is a one-step process

That’s because the Hot Dip Galvanising industry often uses tape, silicone and lime
for their galvanising procedures.

Finally, there’s a solution to this problem: Galvastop®. It is an easy-to-use paint-on masking product for Hot Dip Galvanising that goes through all pre-treatments and comes out of the kettle as an ash that is simply wire brushed off. Unwanted zinc sticks to the Galvastop® and not the steel, allowing you to easily remove both. No grinding or retapping required.

Chemical engineers developed this product as a stable and convenient stop-off
galvanising material. It’s also safe for use as a heavy-duty corrosion preventative
coating in extreme environments.

The benefits of Galvastop® include:

• Shorter cure times than silicone
• Shorter application time than high-temperature aluminium tape (HTAP)
• It’s easy to apply to threads, especially when compared to HTAP, which has a particularly sticky adhesive that is difficult to dispense off the roll
• It’s much cleaner after hot-dip galvanising involving threads when compared to HTAP and silicone
• It’s easy and fast to remove from threads when compared to HTAP. With HTAP, the tape has to be scraped off with a knife, which can potentially damage the threads.

Polishing copper often involves hazardous industrial cleaning chemicals that put your health at risk. It can even grind down good copper metal, weakening your systems and requiring more frequent repairs!

Reba safe copper polish is the answer to heavily tarnished copper containers, fixtures and machinery. After removing any rust and contaminant with our other non- toxic cleaner, you can bring back its original lustre with just a single mirror shine polish.

Induction hardening has never been easier or safer than with Aquatensid BW, the water-based quenchant. Aquatensid BW comes as a thick green liquid that offers non-toxic quenching and doesn’t contain mineral oil, nitrite or other harmful materials commonly found in chemicals used in induction hardening and tank quenching.

Aquatensid BW works because it has a short vapour phase, providing the fast and uniform quenching required by plain carbon and low alloyed steels. It also comes in a high concentration, reducing the quenching speed of water and avoiding any potential for distorting and cracking that can happen to particularly hard alloyed steels.

Drawlub TD 50
Drawlub TD 50 is a water-immiscible coolant that contains chlorine and can be used for metal forming operations on iron and non-iron containing metals. This coolant has high lubricating properties and high film strength. It works well in the moulding of bolt heads, thread rolling and wire, tube and bench drawing operations.

It can also be used for heavy-duty fine blanking and deep drawing operations on various strengths of metals and metal alloys.

Isolube 3411
Isolube 3411 is a metalworking fluid primarily meant for use on aluminium. It has a low viscosity, allowing it to perform well in punching operations. After usage, the residual liquid has low odour and is not noticeable.

Before using Isolube 3411, make sure that it’s room temperature, and never expose it to extreme temperatures. This material is not classified as hazardous according to hazardous material regulations and GGVS and GGVE.